The BILLET ENFORCER starts from a custom extruded piece of 6061-T6 aluminum and is produced on a 5-axis machining center. The raised boosters are also machined from 6061-T6 aluminum which allows us to better channel fuel around the entire diameter of the booster. This along with raising the exit point of the fuel in the booster helps to stop fuel slosh out of the on launch, and when going on the throttle stop. Having these parts CNC machined from billet allows us to make any changes necessary without casting limitations. The billet material also adds strength, eliminating warped or broken main bodies. The fully CNC machined main body is hard anodized after machining to eliminate any corrosion problems, and makes far a good looking carburetor for years to come. The throttle shaft bushings are made from oil impregnated bronze to make for smooth throttle transition, and eliminate throttle sticking off idle. The standard 7-9/16 x 5-⅜ hood scoop tray mounting flange is integrated into the carburetor which eliminates the need to run a plate below the carburetor which creates a much cleaner setup. The externally adjustable linkage is Teflon coated, and is made from precision ground steel with tig welded laser cut flanges, making it strong and corrosion free. These features along with our billet metering blocks, billet enforcer large window sight glass bowls, screw on jet extensions, and a notched float, makes this what we believe to be the best value the carburetor industry has seen.

BILLET ENFORCER DRAG RACE 4500 SERIES CARBURETORS

FEATURES

-APD Custom Calibrated Billet Metering Blocks
-4 Corner Idle System
-Adjustable External Throttle Linkage
-Stainless Throttle Plate Screws
-Adjustable Air Bleeds
-High Flow Pump Nozzles & Screws
-Custom Floats
-Custom Needle & Seats
-Anodized Float Bowl Plugs
-6061-T6 Machined Main Body
-Raised Billet Boosters to Help Demand & Control
-Precision Machined High Flow Jets

Drag Race

 

GAS CARBURETORS

702057 – 1050 CFM

702060 – 1050 CFM THROTTLE STOP
702065 – 1050 CFM TUNNEL RAM
702072 – 1150 CFM
702080 – 1150 CFM TUNNEL RAM
702081 – 1175 CFM THROTTLE STOP
702087 – 1250 CFM
702095 – 1250 CFM TUNNEL RAM
702096 – 1450 CFM
702097 – 1450 CFM TUNNEL RAM
702098 – 1525 CFM
02099 – 1600 CFM
702100 – 1700 CFM

E85

702357 – 1050 CFM
702377 – 1150 CFM
702361 – 1175 CFM
702387 – 1250 CFM

ALKY

702257 – 1050 CFM
702265 – 1050 CFM TUNNEL RAM
702272 – 1150 CFM
702275 – 1150 CFM THROTTLE STOP
702273 – 1150 CFM TUNNEL RAM
702287 – 1250 CFM
702290 – 1250 CFM TUNNEL RAM
702292 – 1450 CFM
702294 – 1450 CFM TUNNEL RAM
702296 – 1600 CFM

4150 BILLET ENFORCER

FEATURES

-6061-T6 CNC Machined Main Body
-Raised Booster to Help With Fuel Control & Demand
-Billet Base Plate With Adjustable Secondary Idle
-Coated Throttle Shafts
-Stainless Throttle Plate Screws
-A.P.D. Custom Calibrated Metering Blocks
-4 Corner Idle System
-Adjustable Air Bleeds
-Custom Floats
-Custom Needle & Seats
-Anodized Float Bowl Plugs
-Precision Machined High Flow Jets

Drag Race

ALKY

702210 – 750 CFM
702215 – 750 CFM TUNNEL RAM
702217 – 850 CFM
702219 – 850 CFM TUNNEL RAM
702220 – 950 CFM
702225 – 950 CFM TUNNEL RAM
702230 – 1000 CFM
702235 – 1000 CFM TUNNEL RAM
702237 – 1040 CFM
702238 – 1040 CFM TUNNEL RAM

GAS

702010 750 CFM
702015 750 CFM Tunnel Ram
702016 850 CFM
702018 850 CFM Tunnel Ram
702020 950 CFM
702020 950 CFM Tunnel Ram
702030 1000 CFM
702035 1000 CFM Tunnel Ram
702040 1040 CFM
702045 1040 CFM Tunnel Ram

E85

702311 – 600 CFM
702312 – 650 CFM
702310 – 750 CFM
702320 – 950 CFM
702230 – 1000 CFM

CIRCLE TRACK CARBS

702405 – 600 CFM GAS
702407 – 650 CFM GAS
702415 – 750 CFM GAS
702416 – 850 CFM GAS
702420 – 950 CFM GAS
702425 – 1000 CFM GAS
702615 – 750 CFM ALKY
702616 – 850 CFM ALKY
702620 – 950 CFM ALKY
702625 – 1000 CFM ALKY
702305 – 600 CFM E85
702307 – 650 CFM E85
702309 – 750 CFM E85

High flow power valves (gas) improve drivability through the corners. Custom angled floats insure proper float levels in cornering.