BELT DRIVEN FUEL SYSTEMS

This fuel system is without a doubt the most compact, easy to install system available. Machined from the highest quality materials, this system is built to last. All internals are hardened and hard anodized. Available in kits for SBC & BBC, and Big Block Chrysler.

PRO BOOST FUEL PUMP

This pump was designed around our blow thru kits. Utilizes-12an inlet and -10an outlet. Capable of supporting 2500hp on methanol. Can also be used on high HP naturally aspirated engines along with roots blown supercharged combinations. Pair with our 4 port boost referenced regulator for the ultimate blow thru fuel system.

INTERNAL BYPASS FUEL PUMP

Requires only one line in and one line out to operate with no return line needed. The idle and high speed pressure are still separately adjustable with this new design. Uses the same high quality internals as our standard pump.

FLOW NUMBERS IN GPM AT 50 PSI AT 4000 PUMP RPM

STANDARD 600″PRO BOOST 1″ELITE 1.25″ULTRA ELITE 1.50″
5 GPM6.75 GPM10.5 GPM13.5 GPM
    

DIAPHRAGM BYPASS REGULATORS

The APD diaphragm bypass regulators are compact lightweight units designed to regulate fuel pressure when using an APD mechanical fuel pump #6100 or other aftermarket belt drive fuel pump. The APD Regulators feature a black anodized fnish, with ⅜ NPT inlets, a #8 AN O-ring outlet, and a ⅛” NPT fuel pressure gauge port. Available in two or four port designs.

FUEL DIVERTING VALVE

NHRA & IHRA legal fuel diverting valve is a must for class competition.
APD has revolutionized the age old design by excluding constantly leaking O-rings. This APD design features a single internal seal on the diverting shaft. O-ring are only on the inlet and outlet fittings.

ADJUSTABLE FUEL LOG

APD’s adjustable fuel log fits 4150 or 4500 series carburetors and features a #8 AN fuel inlet, two standard APD or Holley inlet fittings, and a ⅜” NPT rear port for a diaphragm bypass regulator #706020 and/or fuel pressure gauge adaptor.

FUEL FILTERS

APD inline fuel filters feature a 100 micron stainless steel element and a rugged black anodized finish. 5 ½” long / 2” diameter. Compatible with gas or alcohol.

MANDREL DRIVES

Pro series CNC steel mandrels include all necessary pulleys and shim kits. Available for big block and small block applications.

MOUNTING

APD offers a wide range of fuel pump mounting options. All fuel pump mounts come complete with drive belts to fit your application. Low mount brackets also double as a crank trigger bracket which allows an alternator or oil pump to mount on the opposite side.

FUEL SYSTEM COMPONENTS

706102 – STANDARD BELT DRIVE FUEL PUMP (EXT BYPASS)
706101 – INTERNAL BYPASS STANDARD BELT DRIVE PUMP
706103 – PRO BOOST BELT DRIVE FUEL PUMP
706104 – ELITE PRO BOOST BELT DRIVE FUEL PUMP
706105 – ELITE ULTRA PRO BOOST BELT DRIVE FUEL PUMP
706106 – BBC STANDARD FUEL PUMP KITS
706107 – SBC STANDARD FUEL PUMP KITS
706011 – ADJUSTABLE FUEL LOG
706020 – APD 2 PORT BYPASS
706021 – APD 4 PORT BYPASS
706032 – FUEL DIVERTING VALVE (3 WAY)
706156 – #10 INLINE FUEL FILTER
706028 – BYPASS INSTALL KIT – FUEL LOG
706029 – BYPASS INSTALL KIT – 4 PORT REGULATOR
706030 – BYPASS INSTALL KIT – DIVERTER VALVE
706034 – DIVERTER VALVE INSTALL FITTING

706110 – BBC LOW LEFT CRANK TRIGGER MOUNT
706111- BBC LOW RIGHT CRANK TRIGGER MOUNT
706112 – BBC UPPER LEFT WATER PUMP MOUNT
706113 – BBC UPPER RIGHT WATER PUMP MOUNT
706131 – BB CHRYSLER LOW RIGHT CRANK TRIGGER MOUNT
706134 – BBC MANDREL SYSTEM
706125 – SBC LOW LEFT CRANK TRIGGER MOUNT
706126 – SBC LOW RIGHT CRANK TRIGGER MOUNT
706127 – SBC UPPER LEFT WATER PUMP MOUNT
706128 – SBC UPPER RIGHT WATER PUMP MOUNT
706129 – SBC MIDDLE LEFT MOUNT
706130 – SBC MIDDLE RIGHT MOUNT
706135 – SBC MANDREL SYSTEM

ELECTRIC FUEL SYSTEMS

PRODUCT ENGINEERING ELECTRIC FUEL SYSTEMS

Product Engineering builds the finest custom built electric fuel systems available. From Pro Stock to Street, these components have become the product of choice among racers and automotive enthusiasts who demand quality parts for their vehicles. Leading edge design and attention to detail ensures that the products built will perform and last like no other. All product Engineering fuel pimps and regulators carry a 2 year unconditional parts and service warranty that is unmatched in the industry.

PRODUCT ENGINEERING

STANDARD RACING FUEL PUMP 2000 HP MAX – #704400
COMBO RACING FUEL PUMP 2000 HP MX – #704450
SPORTSMAN RACING FUEL PUMP 900 HP MAX – #704500
SPORTSMAN COMBO RACING PUMP 900 HP MAX – #704510
BILLET 4 PORT REGULATOR -10 INLET -6 OUTLET – #704520
BILLET 2-PORT REGULATOR -10 INLET -6 OUTLET – #704530